PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: highschool dream on February 24, 2017, 09:42:51 AM
-
Ok so v8 is in and running. Now hooking up gas lines, large one goes to fuel pump and small one goes where? :o
-
The small line is the gas tank vent. Typically it runs to a canister and ultimately vents to the intake system, often through additional hoses and one way valves. You didn't mention the year of your car. On the earlier cars there is a blue canister that bolts near the frame rail. The latter cars I don't know.
-
Thanks wittsend. Looking closer at the gas tank on 80 pinto , I can see that there is 3 lines . one goes to canister on fender leaving two.looking at my 76 v6 pinto, I have one canister , second one goes on intake behind carb, 3rd to gas pump. Would it be or could it be the same for my 302
-
If you have three lines one goes to the fuel pump , one goes to the carbon canister , the last one which is a very small line goes to the fuel pump return line ( if you had a 2.3 ) for anti vapor lock , your carbon canister should be in the drivers side door , if it has not been removed, the line goes to the top of the fuel tank , (vent ) , the other line is the extra line on the fuel gauge sender ,