Author Topic: exhaust manifold (Read 2234 times)

whoever · « **on:** April 11, 2012, 06:05:01 PM »

What is the difference between a 2.0 and 2.3 manifold?

Glitch666 · « **Reply #1 on:** April 11, 2012, 07:06:48 PM »

Uhm lots of stuff is different, starting out with 1 is for a 2.0 and 1 is for a 2.3. the bolt patter is different also I believe.

whoever · « **Reply #2 on:** April 11, 2012, 09:42:34 PM »

Thank you Captain Obvious. I can tell that numbers are different. As I am relatively new to the Pinto engine, I was unsure if some things may be interchangeabl e or not, such as in older small block Chevy's. Thank you for the input anyway.

fast64ranchero · « **Reply #3 on:** April 11, 2012, 09:48:55 PM »

depends on if your talking about a Lima 2.0 and 2.3 or a early (1970-1974) EAO 3 cam bearing 2.0L the Lima 2.0 and 2.3 parts are interchangable, the early 2.0L and the later 2.3 are completely different engines, really the only things that are the same on the early 2.0 and the later 2.0 and 2.3 lima's are the lower 4 bell housing bolts..

whoever · « **Reply #4 on:** April 11, 2012, 10:51:10 PM »

Thanks. This is the part I found. Don't know how common they are, but if it would have worked on my 2300, I thought it was a pretty slick piece.
http://www.ebay.com/itm/Ford-Pinto-2-0L-Exhaust-manifold-cast-iron-header-with-down-pipe-/280861933997?pt=Motors_Car_Truck_Parts_Accessories&hash=item4164ad01ad&vxp=mtr

fast64ranchero · « **Reply #5 on:** April 12, 2012, 09:16:11 AM »

Very cool piece! it's a UK piece for a RS, prob came off a 1800cc but will fit our early EAO 2000cc 2.0L engines, I think this manifold would work great on a stock or mild 2.0L, the US stock cast manifold flows terible,

Nice find!

News:

Current Classifieds

Author Topic: exhaust manifold (Read 2234 times)

whoever

exhaust manifold

Glitch666

Re: exhaust manifold

whoever

Re: exhaust manifold

fast64ranchero

Re: exhaust manifold

whoever

Re: exhaust manifold

fast64ranchero

Re: exhaust manifold