Current Classifieds

1979 Pinto Sedan Delivery

Date: 06/15/2019 03:30 pm
78 pinto wagon

Date: 06/04/2020 12:42 pm
'80 Pinto Wagon
Date: 02/01/2018 05:20 pm
1980 hood needed
Date: 04/23/2020 10:41 pm
77 Cruising wagon Rear cargo light
Date: 10/02/2017 02:16 pm
Drivers side door panel Orange
Date: 05/22/2018 02:27 pm
Alloy Harmonic Balancer

Date: 07/10/2020 12:17 pm
vintage Pinto script sunshades

Date: 03/05/2017 03:27 pm
Looking for 1.6 exhaust manifold heat shield, front license plate bracket
Date: 11/04/2018 02:34 am
sport steering wheeel
Date: 10/01/2020 10:58 pm
McLeod Clutch

Date: 04/12/2017 12:08 pm
'78 Pinto Windshield Trim
Date: 05/09/2017 10:46 am

Author Topic: Exhaust manifold egr port  (Read 444 times)

0 Members and 1 Guest are viewing this topic.

Offline Nudemaple

  • Pinto Member
  • **
  • Posts: 16
  • FeedBack: +0/-0
  • Gender: Male
  • Another Pinto Driver

  • Total Badges: 1
    Badges: (View All)
    Topic Starter
Exhaust manifold egr port
« on: February 27, 2020, 11:34:53 PM »
Finally decided to remove the heat shield covering the 2.3L exhaust manifold and saw what I was suspecting for a few years. A cracked manifold. Removed the manifold, EGR tube and downpipe and removed the crumbling manifold gasket. I was able to find an exhaust manifold via Facebook however the egr port and air diverter ports are plugged. Since I'm in California I have to unplug both ports to reconnect everything. The EGR tube is in tact and in good condition. I was able to remove the EGR port plug and I need opinions on which fitting will fit in there?  The fitting appears to be a 90 degree 1/2" NPT Female x 1/2" NPT Male like this one? Correct? Will the rotating male nut at the end of the EGR tube thread correctly into the female of this fitting? Or any other suggestions? Thank you.....

    https://www.amazon.com/Weatherhead-3400X8-Fitting-Degree-Female/dp/B00BKFD0X8/ref=sr_1_14?keywords=street+elbow+1%2F2+inch&qid=1582863566&refinements=p_76%3A1249158011%2Cp_85%3A2470955011%2Cp_n_feature_four_browse-bin%3A3052062011&rnid=3052033011&rps=1&s=industrial&sr=1-14