Current Classifieds

Electrical
Date: 03/29/2017 11:37 am
Need 4 wheel center caps for 77 Pinto Cruzin Wagon
Date: 10/03/2018 02:00 pm
Sunroof shade
Date: 06/19/2019 01:33 pm
Bumper, grill and fender wanted
Date: 12/24/2016 04:13 pm
New cam

Date: 01/23/2017 05:11 pm
Pangra wanted
Date: 02/05/2017 01:58 pm
Seeking parts
Date: 10/18/2020 10:35 am
Bumpers
Date: 07/06/2018 04:47 pm
Pinto Fiber Glass Body Parts
Date: 01/06/2019 06:53 pm
1979/80 Pinto needs to be saved
Date: 09/10/2018 10:41 pm
A.c. alternator hrackets
Date: 09/03/2017 12:11 pm
Pangra wanted
Date: 02/05/2017 01:58 pm

Author Topic: Exhaust manifold egr port  (Read 445 times)

0 Members and 1 Guest are viewing this topic.

Offline Nudemaple

  • Pinto Member
  • **
  • Posts: 16
  • FeedBack: +0/-0
  • Gender: Male
  • Another Pinto Driver

  • Total Badges: 1
    Badges: (View All)
    Topic Starter
Exhaust manifold egr port
« on: February 27, 2020, 11:34:53 PM »
Finally decided to remove the heat shield covering the 2.3L exhaust manifold and saw what I was suspecting for a few years. A cracked manifold. Removed the manifold, EGR tube and downpipe and removed the crumbling manifold gasket. I was able to find an exhaust manifold via Facebook however the egr port and air diverter ports are plugged. Since I'm in California I have to unplug both ports to reconnect everything. The EGR tube is in tact and in good condition. I was able to remove the EGR port plug and I need opinions on which fitting will fit in there?  The fitting appears to be a 90 degree 1/2" NPT Female x 1/2" NPT Male like this one? Correct? Will the rotating male nut at the end of the EGR tube thread correctly into the female of this fitting? Or any other suggestions? Thank you.....

    https://www.amazon.com/Weatherhead-3400X8-Fitting-Degree-Female/dp/B00BKFD0X8/ref=sr_1_14?keywords=street+elbow+1%2F2+inch&qid=1582863566&refinements=p_76%3A1249158011%2Cp_85%3A2470955011%2Cp_n_feature_four_browse-bin%3A3052062011&rnid=3052033011&rps=1&s=industrial&sr=1-14