Current Classifieds

1972 Pinto for sale

Date: 05/19/2021 12:41 am
convert to stick
Date: 05/19/2018 09:26 pm
1979 Pinto Rear Bumper
Date: 03/26/2021 03:26 pm
71,72 Pinto Door Panels

Date: 06/17/2018 08:27 pm
72 Runabout Sprint Edition

Date: 04/25/2018 02:51 pm
Clutch Cable Needed
Date: 04/03/2017 11:03 pm
74 Pinto Hub Caps & Trim Rings

Date: 02/18/2017 04:47 pm
oldskool787
Date: 02/12/2017 12:42 pm
79 pinto driveshaft
Date: 08/18/2018 02:03 pm
2.8 Engine mount brackets
Date: 12/28/2016 11:42 am
71-73 Rear valance panel
Date: 01/14/2021 06:54 pm
Pinto sales literature / magazine ads/ owners manuals
Date: 03/21/2017 07:47 pm

Author Topic: engine noise  (Read 541 times)

0 Members and 1 Guest are viewing this topic.

Offline MrNick

  • Pinto Driver
  • *
  • Posts: 7
  • FeedBack: +0/-0

  • Total Badges: 2
    Badges: (View All)
    Topic Starter Fifth year Anniversary
engine noise
« on: September 24, 2018, 08:03:22 AM »
I have  a 2.3 L pinto.  When cold it makes a rattle noise that sounds like rods but seems to be coming from the upper part of the motor.  When the engine warms up the noise almost goes away.  The cam and rockers looked good and I replaced the lifters.  No change.  Noise still there.  Any ideas ?

Offline Wittsend

  • Pinto Master
  • *****
  • Posts: 2496
  • FeedBack: +241/-0

  • Total Badges: 8
    Badges: (View All)
    Tenth year Anniversary Mobile User Topic Starter Poll Voter 1000 Posts Linux User Windows User Fifth year Anniversary
Re: engine noise
« Reply #1 on: September 24, 2018, 10:46:59 AM »
Assuming there is no mechanical issues what weight oil are you running? And when was the last time the filter was changed?  Thicker oil or a prtially clogged filter would restrict oil flow but improve as the oil warmed up.

It only takes a few thousands clearance for valves to become noisy. While a properly functioning hydraulic lifter should prevent that unseen rocker or cam wear would not. A valve may have become bent, hanging in its giude or have debris under its seat. Any one of those things would increase clearance.

Does it sound like a single clatter..., or does it sound like all the valves are clattering?  Lastly an exhaust leak can often sound like clatter and as the manifold warms up the metal expands the leak seals (or seals somewhat).