« Reply #2 on: March 07, 2014, 07:40:37 AM »
im running a 8.8...... i started with a disc rear end and it was too wide so i swapped in some fox mustang axles and drum brakes which narrowed it 1.5 inches... i run 15x8 rims with 5 inch backspacing and it all fits under the car.... if you want disc id go as suggested with a exploder rear end with one side shortened..... if you get it from a 4x4 you get 31 spline axles and either 373 or 410 gears from the factory....
Logged
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,