PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Pinto5.0 on August 12, 2012, 09:05:40 PM
-
OK here goes nothing. I managed to acquire two D5 & two D9 bellhousings. Yeah, it was pricey but I needed 2 of them & it was a package deal.
I have one of the D9 forks & I know any 5.0 fork works so I'm good to go for the 2nd one. The problem is going to be the missing D5 forks. I know they are specific to these bells.
I also know the part number for them is D5ZA-7515-BA but what are they out of? Are those just standard Pinto/MII forks?
If I can get the right D5 forks I'll probably use those & sell the D9's off. I also have a spare bellcrank bell housing now that I wont need. I've still gotta pick up another T-5 but that's the easy part.
-
they are out of a 75 mII with the 2.3 liter 4 speed manual cars
-
Great, a 1 year part. That wont be too hard to locate at all......
Uuuuggghhhh!!!
Well....if anyone has one or two of them floating around message me please
-
I'll try and remember to look at the part numbers on my old bell (using a Quicktime RM-6063 now) and fork part number.
The only problem I see with the fork I have is the ball on the end of the cable is too small for the fork. Likely going to weld it & re-drill. Or make an adapter.
Fork I have is new.
-
The way everyone closes the hole is by banging a small hole washer with a ball peen hammer to cup it & weld it over the larger hole. I have to do that to my 5.0 fork when the time comes.