Current Classifieds

79 Wagon with many extras
Date: 07/08/2020 04:18 pm
hubcaps

Date: 10/31/2018 12:04 pm
74 4 spd and rear axle
Date: 09/26/2018 03:51 pm
Clutch Cable Needed
Date: 04/03/2017 11:03 pm
Accelerator Pump Diaphram for 1978 Pinto
Date: 09/03/2018 08:58 am
2.3 engine mounts,glove box parts,emblems,hatch,doors,hinges etc
Date: 08/26/2018 06:35 pm
Pinto Vinyl Top

Date: 10/09/2020 10:29 pm
Pinto hubcap
Date: 01/07/2017 08:40 pm
1971 Pinto Runabout turn key driver

Date: 12/04/2018 07:40 pm
1978 PINTO PONY FOR SALE 17,000 ORIGINAL MILES !!!!!!!
Date: 10/10/2019 10:02 pm
1974 Pinto Door Handles

Date: 03/07/2017 04:06 pm
72 pinto drag car

Date: 07/08/2017 08:53 pm

Author Topic: engine noise  (Read 542 times)

0 Members and 1 Guest are viewing this topic.

Offline MrNick

  • Pinto Driver
  • *
  • Posts: 7
  • FeedBack: +0/-0

  • Total Badges: 2
    Badges: (View All)
    Topic Starter Fifth year Anniversary
engine noise
« on: September 24, 2018, 08:03:22 AM »
I have  a 2.3 L pinto.  When cold it makes a rattle noise that sounds like rods but seems to be coming from the upper part of the motor.  When the engine warms up the noise almost goes away.  The cam and rockers looked good and I replaced the lifters.  No change.  Noise still there.  Any ideas ?

Offline Wittsend

  • Pinto Master
  • *****
  • Posts: 2496
  • FeedBack: +241/-0

  • Total Badges: 8
    Badges: (View All)
    Tenth year Anniversary Mobile User Topic Starter Poll Voter 1000 Posts Linux User Windows User Fifth year Anniversary
Re: engine noise
« Reply #1 on: September 24, 2018, 10:46:59 AM »
Assuming there is no mechanical issues what weight oil are you running? And when was the last time the filter was changed?  Thicker oil or a prtially clogged filter would restrict oil flow but improve as the oil warmed up.

It only takes a few thousands clearance for valves to become noisy. While a properly functioning hydraulic lifter should prevent that unseen rocker or cam wear would not. A valve may have become bent, hanging in its giude or have debris under its seat. Any one of those things would increase clearance.

Does it sound like a single clatter..., or does it sound like all the valves are clattering?  Lastly an exhaust leak can often sound like clatter and as the manifold warms up the metal expands the leak seals (or seals somewhat).