PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: wbacon8780 on March 12, 2013, 02:50:00 PM
-
I need some ideas on how to repair the cowl rust on my 79 Pinto. It is all around the vent that leads to the heater/ac box. I searched the forums and really didn't find to much except the putty thread. Is there aftermarket panel for inside the cowl. Also I was thinking about cutting the cowl vents so I can work in there. I'm in the process of removing the Heater/ac box but still looks like there isn't much room under there.
-
Ok, looks like I'm going to rebuild it with fiberglass.
-
Bacon,
There have been several thread on how to gain access into this area- not fun... Do a search for Cowl and you will find several step by step posts...
Have fun!
-
Yes sir, I have read all them threads. I was looking for some ideas on how to repair the rust above the AC/Heater box which I determined that I will fix with fiberglass.
-
Check out this thread posted below. Flash041 is installing A/C in his Pinto & had to fix some rust with fiberglass.
Hope it helps some.
http://www.fordpinto.com/your-project/ac-install/msg136067/?topicseen#new (http://www.fordpinto.com/your-project/ac-install/msg136067/?topicseen#new)
-
Thanks, it did help.