I have a 72 2.0 4 sp wagon.  Was dads.  Prob is with clutch release fork and bearing.  Bearing not releasing, spins all the time, not a cable or cable spring problem, or adjustment.  There's a 5/8" slot for the fork in the bearing, and a almost flat shift fork 1/8" thick.  I'm told there's supposed to be a spring on the fork to pull the bearing back.  Who no's wut dad did.  Got a kit from AZone with correct bearing, but without a spring, fork cannot pull bearing away from clutch forks.  I'm told either bearing or fork needs a 'push back' spring'?  Do I need a clutch fork with a spring on it?  What's my prob?  If so, where do I find one, and what other vehicles are compatible for fork?  I was told the ATP ZA-125 would work, then I was told it wouldn't.  Bearing always spins, tired of replacing, PLEASE help.......

Yes, thank u for the reply.  I am missing the spring clips on my fork.  I posted that I needed it.  Know where I can find one?  T O bearing always turning.  Clutch adjustment, spring and cable fine.  Just nothing to push that bearing back.  Summit racing said an atp-125 (mustangs) should work, another guy there said he thought it wouldn't.  Any help would be appreciated.