72 Pinto Wagon , 2000CC, 2V carb. Restored the car inside and out. Replaced plugs, points, rotor, distr. cap, wires, fuel pump, hoses, belts, etc. Runs poorly. Tried a new (rebuilt carb.) It ran worse, floats in new carb. sticking etc. Sent is back. Put original carb back on, Idle very rough, starves out and stalls, hesitations when warmed up, flat power.
1) should I go for another rebuilt carb?
2) where can I find a schematic that shows the location of adjustments on carb., and that tells me what they should be set at?
3) should I just take it to a really good mechanic.?
Thanks, jt