PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: mightyss1 on October 26, 2014, 05:14:58 AM

Title: 9" in pinto swaps
Post by: mightyss1 on October 26, 2014, 05:14:58 AM

wondering if there are any models of fords that were close to swaping their 9" into pinto w/o shortening the housings???

Title: Re: 9" in pinto swaps
Post by: oldkayaker on October 26, 2014, 03:30:41 PM

See the link below.  The 57-59 Fords and the some of 65-66 hi-po 289 Mustangs had 9" rears.  I replaced the 8" rear in my 66 Mustang with a 57 Ford 9".  It bolted in the 66 but I may have shortened the drive shaft, don't remember.   The spring perches would need some modification to match the Pinto.  I would be surprised if you can find any of these in the junk yard now.
http://www.mustangsandmore.com/ubb/FordRearDimensions.html

Title: Re: 9" in pinto swaps
Post by: mightyss1 on October 29, 2014, 02:20:44 PM

well, my car has a 9" now..it looks stock( not narrowed). it does not have aftermarket axles, but has the big ford axle housing flange. but not the 5 1/2 bolt pattern like on the trucks...? curiosity did kill the cat, right.??

Title: Re: 9" in pinto swaps
Post by: Pintocrazed on October 29, 2014, 02:21:39 PM

ANY IDEA WHAT IT CAME OUT OF MIGHTY ?

Title: Re: 9" in pinto swaps
Post by: mightyss1 on October 30, 2014, 02:28:56 PM

nope, the guy i bought it from didnt build the car...so, im playing detective. i did just put a cool disc brake kit on it from summit racing. since it had NO rear brakes at all, just backing plates !!!! wow, just discovered my answer possibly. it has the flat band in the middle, and a bottom drain plug......1957 ford..?!?! :o  how many inches is a stock pinto 6 3/4 rear flange to flange..???

Title: Re: 9" in pinto swaps
Post by: Pintocrazed on October 30, 2014, 02:54:24 PM

I THINK ITS 57"

Title: Re: 9" in pinto swaps
Post by: mightyss1 on October 30, 2014, 03:26:58 PM

well, that jives then. my 1957 - 9" axle is 57.25 inches, so it was a direct bolt in....thnx pintocrazed...

Title: Re: 9" in pinto swaps
Post by: 78_starsky on November 23, 2014, 10:22:39 AM

hi,  i don't know how i missed this thread, but here is the start of a book i own about ford rears.

i hope this link works to the page i am linking to.

hope this helps.

cheers


http://books.google.ca/books?id=Cqb2F03eYtsC&pg=PA7&lpg=PA7&dq=the+1957+housings+do+not+have+dimples+on+them+and+have+an+oil+drain+plug&source=bl&ots=E0b7Zuyka3&sig=xMsV5iQbNDLV0tWZV8IcCPAmNdg&hl=en&sa=X&ei=1AhyVICLGsibigLx5oDgAg&ved=0CB0Q6AEwAA#v=onepage&q=the%201957%20housings%20do%20not%20have%20dimples%20on%20them%20and%20have%20an%20oil%20drain%20plug&f=false