just running monroe's at the moment, they are acceptable for reasonable factory facimilies and for us wagon owners mate up in the back with a set off a mid 70's camaro which match the stock ones for which you can no longer find a listing. they also have rear coil overs in the same line but again for us wagon guys. i think bilstein and kyb build some midrange stuff, qa1's are a pretty serious upgrade of the aluminum coil over variety that would go nice with the chrome but are quite spendy.. Since you're at it anyways go to fatman or the like and grab a strut rod eliminator kit that triangulates the lower arm, it is small matter of laying down a couple beads of weld on the crossmember for the tubes and gussets. When i tear down the front end to add another 2 inches to the rotors over the granada ones it's on the list.