So here's what I'm working with: The starter is good, starter solenoid is new and good, and I can turn the key forward and start the car by using a jumper at the solenoid, but turning the key forward like a normal car gets me nothing.
I was told I needed a new ignition cylinder, so I tried another one but still have the same problem. The only things I could see being wrong now could be a switch I found near the base of the of the steering column, or there's an electrical box of some kind on the driver side fender that I believe is somehow involved.
Any ideas or suggestions on what the check/replace would be appreciated so as not to throw any more unnecessary money into this beast.
Thanks!
Shawn