rims and tires

Started by n2066, June 08, 2003, 10:07:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

TurboPintoDude

I had the 16" wheels off the 88TC on the Wagon for a while, worked out alright, but the fronts kept rubbing the back of the fender in turns.

PINTO_RACER

Quote from: gasrat on June 09, 2003, 10:44:47 AM
i dont bellieve that these are fox rims i dont even know what a fox mustand is. these are rimss that came on 1988 and1989 and possibly some 1990s they are like a 5 spoke rim they had a big center cap with a pony on it

yep fox body mustang  I belive these started in 79 when the big mustang got shrank down to the little one
collection 74-80 pinto's for the last 3 years
13 and counting...

pintojoe

I have a set of 83ish Mutang 14 in GT wheels on my 1973 Runabout. You might not have to run the 1/4in spacer if you can run a 195/185 section width tire. Any thing bigger and they will rub the inner finders and spring e-brake cable clamp under side load and going in and out driveways. Have fun
1973 Pinto runabout, 2000cc,4spd.

Felix Wankel

those would be Fox body Mustang wheels.
84 SVO 1E
74 Pinto wagon turbo project

n2066

i dont bellieve that these are fox rims i dont even know what a fox mustand is. these are rimss that came on 1988 and1989 and possibly some 1990s they are like a 5 spoke rim they had a big center cap with a pony on it

turbopinto72

If you are talking about the "Fox" platform mustang wheels then yes BUT only in the back and with spacers. The wheels have a 5 1/2 back spaceing that will get into the spring. you will need 1/4 spacers to run these wheels. I have slicks mounted up on mine and run the spacers. The tire still rubs the ebrake cable.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

n2066

just wondering if anyone knows if mustang pony rims and tires will fit underneath my 74 runabout