Forum > General Help- Ask the Experts...
72 Pinto diff
(1/1)
Reeves1:
Never had one apart. I have to put seals in this summer.
Do I have to pull axle bearings ? If so , I'll need to find a new set of bearings....
Advice ?
LongTimeFordMan:
Bearings are pressed on with a hydrolic press..i chaned my rear.end.awhil e back and the 71-73 rear ends had smaller bearings than the later ones..
74 and up use the larger bearings like the mii s
Why not just upgrade to a mii 8 inch while you are doing it
Reeves1:
--- Quote from: LongTimeFordMan on January 28, 2023, 10:03:20 AM ---Bearings are pressed on with a hydrolic press..i chaned my rear.end.awhil e back and the 71-73 rear ends had smaller bearings than the later ones..
74 and up use the larger bearings like the mii s
Why not just upgrade to a mii 8 inch while you are doing it
--- End quote ---
Used the 72 diff to make a trailer for a welder....
Navigation
[0] Message Index