PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: halfhorse on November 02, 2018, 12:37:47 AM
-
I've added turbo Tbird disk brakes to my 77 turbo pinto.I want to install a 7" brake booster but the original non power brake master cylinder mount studs are in the way. I've tried a stud remover but they won't budge Anybody removed them? I don't want to just cut them off.Thanks
-
Got the studs out.Auto zone had a better extractor.15$ get one! When I get finished I'll post the process if anyone is interested
-
If you are converting TO power brakes you have to install the parts behind the dash , done this before , there is a plate behind the firewall you have to change , and install the plate that holds the booster , you have to remove the steering column to remove the brace to the fire wall to the dash , it’s all tied together, takes about two hours for the first timer