Author Topic: 2.3L exhaust gaskets (Read 1339 times)

Yelby · « **on:** May 09, 2014, 07:59:15 AM »

There is a flat two-holed gasket that goes at the front of the catalytic converter, is there a donut shaped gasket at the rear of the converter and at the exhaust manifold?

jburt · « **Reply #1 on:** May 09, 2014, 10:46:24 AM »

There is no donut or gasket at the manifold or the outlet of the catalytic converter. They are a direct bolt up. You will want to make sure both surfaces are clean and smooth, and the studs tightened equally.