PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Ruger Nut on December 31, 2011, 10:54:50 AM

Title: 2.3 turbo "Heater fan" replacement.
Post by: Ruger Nut on December 31, 2011, 10:54:50 AM
I'm not finding the late 70's MGB motor and fan suggested earlier . Is there another alternate fan and motor to keep the original heater/ defroster box going in a 79 Pinto with a 2.3 turbo  ?
Title: Re: 2.3 turbo "Heater fan" replacement.
Post by: Pinturbo75 on December 31, 2011, 01:50:32 PM
i believe the honda setup from the 80s works too....
Title: Re: 2.3 turbo "Heater fan" replacement.
Post by: Ruger Nut on December 31, 2011, 02:47:43 PM
Thanks I'll see what i can find. Do you have a specific Honda model in mind?
Title: Re: 2.3 turbo "Heater fan" replacement.
Post by: Pinturbo75 on December 31, 2011, 09:23:08 PM
i think cam used one froma an accord.....
Title: Re: 2.3 turbo "Heater fan" replacement.
Post by: Mike Modified on December 31, 2011, 11:15:37 PM
This works well for me.   8)
 
http://www.turbopinto.com/index.php?topic=782.0 (http://www.turbopinto.com/index.php?topic=782.0)
 
Mike (aka 4-barrel Mike)
Title: Re: 2.3 turbo "Heater fan" replacement.
Post by: Ruger Nut on January 01, 2012, 12:35:14 PM
Can the O2 sensor be relocated farther down the down pipe or onto the exhaust after the down pipe?
 
 
 
 
 
 
Title: Re: 2.3 turbo "Heater fan" replacement.
Post by: Pinturbo75 on January 01, 2012, 03:38:10 PM
it needs to be within 18 inches of the turbo ......