PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: hvdcmgr on February 08, 2019, 11:34:26 PM

Title: 1980 Pony Wagon, Manual Transmission, with A/C Vacuum data
Post by: hvdcmgr on February 08, 2019, 11:34:26 PM
Like many other people I've been struggling with how to connect all the vacuum lines on my wagon.  This is mainly for those, who like me, reside in California and still have to pass a smog inspection.  I've put together what I hope is a complete set of information to make it easier for anyone who needs this information.

I found a lot of good information at this site to know what vacuum diagram is the one for my car.  It also has the information on how to decipher the sticker on your engine to know what vacuum diagram is yours.

To find your diagram see this page: http://myzephyrs.com/calibration_number.htm

This page has many diagrams that you can down load: http://myzephyrs.com/vacuum_diagrams.htm

Part names are here: http://myzephyrs.com/vac_part_name.htm

How to decode the engine label: http://myzephyrs.com/engne_label_decode.jpg
Title: Re: 1980 Pony Wagon, Manual Transmission, with A/C Vacuum data
Post by: hvdcmgr on February 08, 2019, 11:36:52 PM
I see I screwed up on the definitions.  So a second try.
Title: Re: 1980 Pony Wagon, Manual Transmission, with A/C Vacuum data
Post by: hvdcmgr on February 08, 2019, 11:37:48 PM
Man, o man.  Guess I need to get some sleep.