11 Guests, 1 User
SpaceCowboy1979

Author Topic: #1 spark plug not firing  (Read 2260 times)

0 Members and 1 Guest are viewing this topic.

Offline wx7pinto

  • Pinto Driver
  • *
  • Posts: 9
  • FeedBack: +0/-0
  • Gender: Male
  • Michigan Pinto one of the few

  • Total Badges: 3
    Badges: (View All)
    Topic Starter Tenth year Anniversary Fifth year Anniversary
#1 spark plug not firing
« on: June 22, 2013, 05:33:59 PM »
I have a 79 wagon, the #1 spark plug is not firing, I have replaced all the plugs, wires, the distributor cap and rotor, voltage regulator, the ignition module (it melted) and tried switching wires but the #1 plug still does not fire. Since the module melted I figure there must be something causing that and maybe is why #1 is not working. I am not running it any more until I get some idea on what to do, don't want to melt another module. Any ideas?

Offline Pinto5.0

  • Pinto Master
  • *****
  • Posts: 1974
  • FeedBack: +77/-0
  • Gender: Male
  • 80 hatch, 76 Wagon, 72 & 73 Sedans, 71 half hatch

  • Total Badges: 7
    Badges: (View All)
    Topic Starter Signature Poll Voter Mobile User Fifth year Anniversary Windows User 1000 Posts
Re: #1 spark plug not firing
« Reply #1 on: June 22, 2013, 09:30:27 PM »
Have you swapped in another plug? I've had brand new plugs that were junk several times.
'73 Sedan (I'll get to it)
'76 Wagon driver
'80 hatch(Restoring to be my son's 1st car)~Callisto
'71 half hatch (bucket list Pinto)~Ghost
'72 sedan 5.0/T5~Lemon Squeeze

Offline 74 PintoWagon

  • Pinto Sr. Master
  • ******
  • Posts: 3105
  • FeedBack: +540/-0
  • Gender: Male
  • Another Pinto Driver

  • Total Badges: 5
    Badges: (View All)
    Topic Starter Signature Poll Voter Windows User 1000 Posts
Re: #1 spark plug not firing
« Reply #2 on: June 23, 2013, 08:40:12 AM »
Just because it's new don't mean it's good,lol..
Art
65 Falcon 2DR 200 IL6 with C4.

Offline jeremysdad

  • Pinto Sr. Member
  • ****
  • Posts: 405
  • FeedBack: +83/-6
  • Gender: Male
  • Restoring a Daily Driver

  • Total Badges: 4
    Badges: (View All)
    Fifth year Anniversary Topic Starter Poll Voter Windows User
Re: #1 spark plug not firing
« Reply #3 on: June 23, 2013, 10:42:36 AM »
I've chased similar issues before, replacing just about every ignition system component on a Sunfire to eliminate a dead cylinder that would come and go. Out of desperation, came full circle and installed another set of plugs...fixed. Definitely agree with the above suggestions... like anything else humans make, sometimes you get one that's bad out of the box, and it's not necessarily visually obvious.

Good luck! Another thought, have you verified that the plug itself is not getting spark, by grounding the plug (see here: ) while it's removed from the cylinder? Be careful if you do this, Dura-spark bites harder than a points ignition. Ask me how I know. :)