Author Topic: Putting Pony wheels on Pinto Pony (Read 4510 times)

Grumpy · « **on:** February 08, 2011, 08:44:16 PM »

Putting Pony wheels on Pito Pony

These are off of a 91 GT Mustang, 16X7 205/55X16 tires.

Should I paint them white?

They basically bolt on with just a slight rub behind the front wheels(it's a plastic panel)when wheels are turned all the way.

Grumpy

TIGGER · « **Reply #1 on:** February 08, 2011, 09:08:51 PM »

They look real good on the car.

bigbill · « **Reply #2 on:** February 08, 2011, 10:03:33 PM »

I have chrome Ponies on my wagon and I have 225's on the front and 245's on the rear. They ALMOST don't fit! BIG BILL

Grumpy · « **Reply #3 on:** February 09, 2011, 08:40:32 PM »

But would you paint them white.

4.0 Rover motor.

Grumpy

skunky56 · « **Reply #4 on:** February 11, 2011, 04:18:22 PM »

Grumpy, if you use a 1/2" spacer no more rubbing you can get away with a 3/8" but 1/2" works best,yes you have to use longer studs but it is worth it. You can run a 225/55r16 with the 1/2" spacer

Cheeseliner · « **Reply #5 on:** February 13, 2011, 10:28:19 AM »

Man, those do look nice. I have a set of Escort GT wheels. Bolt pattern is right, but the center hole is too small. I could ream off the inner lip of the center hole, but I think im going to get rid of them and go a different route. I would nt mind a set of these now! Looks good Grumpy. Kenny

71hotrodpinto · « **Reply #6 on:** February 13, 2011, 02:14:58 PM »

I think they look perfect the way they are. Dont paint them. Nice Fit!
I always toyed with th idea of some mustang wheels. But in the end i love my Centerlines.
Id also go with the spacers and longer studs as suggested. The rubbing will get annoying after a while LOL!

rkk · « **Reply #7 on:** February 13, 2011, 03:15:29 PM »

My 2 cents they look great. DON'T paint them white

Bigtimmay · « **Reply #8 on:** February 13, 2011, 03:29:17 PM »

If i was gunna paint a set of ponys they would have to be black or a gun metal look

Grumpy · « **Reply #9 on:** February 13, 2011, 07:48:05 PM »

71hotrodpinto

The rubbing is the outside rear corner of the tire touching the fiber panel in the rear of the front wheel well, very minor. Spacing would make that worse, I think. The back could use a little spacing out, the inside lip of the fender is almost three inches away, while the inside of the tire clears the spring by about an inch. I will have to get at least two five bolt wheels when I put in the IRS, I've seen a company on line that makes Ponies in 17 inch and modern offset(the IRS is from a 2003 Cobra Mustang).

Found another good Rover, a 4.0, cheap. I'm trying to get everything together to put a T5 in it. Though I may not start until after Carllyle.

Grumpy

DreamBean · « **Reply #10 on:** February 14, 2011, 04:06:54 PM »

Well, I like the Gray look myself.

I have seen your ride. I just hope you didn't pay what he wanted for it. Great car, I was suprised as to the condition it was in. I have a 79 that is the same color paint, That I am going to fix for the wife.

You live just a stones throw from me. I live in Greer S.c.

Pinturbo75 · « **Reply #11 on:** February 14, 2011, 07:42:39 PM »

well that puts 5 pintos within about 2.5 hours from each other.... we need to do a meet......

Grumpy · « **Reply #12 on:** February 14, 2011, 08:55:03 PM »

DreamBean

I paid about twice what it cost new. I had known of it's existence for 30 years and tried to get it. But when Mrs. Williams died I was in the midst of hip replacement and I had to wait a year to buy it. Just 6446 miles on the OD. I've got 11,000 on it now.

Grumpy

Cheeseliner · « **Reply #13 on:** February 27, 2011, 01:51:51 PM »

Grumpy. I just traded my T5 for a set of Ponies. They have brand new Cooper Cobra 215/55/16 on them. I hope that the little bigger size isnt a problem. Ill find out when i get the Pinto out later in the week. I tried to post a pic of one, but some thing says my file is too big.......

CRUISEWAGON77 · « **Reply #14 on:** September 28, 2011, 12:55:16 AM »

Are any of your cars lowered? I want to upgrade to either 16" or 17" wheels but my car has been lowered. I am going to upgrade to drop spindles, but it's still a 2" drop. Any pics of cars with big wheels set down low???

wondersmelonade · « **Reply #15 on:** June 26, 2012, 08:41:26 PM »

I know I'm bringing this back from the dead but, my wagon is lowered 2" with spindels and 225's rub real hard in front. Ended up going 205/55 front and 225/60 rear. Rear could use a spacer for sure but overall I like it.

Grumpy · « **Reply #16 on:** August 09, 2012, 11:05:48 PM »

wondersmelonade

I just put 205/50 16 Hankook V2s on my front end and I'm in love with my new tires. They turn like a laser, track EXACTLY where I point them, don't squeal when leaned on and even stick better than my back ones in the wet. And no more rub! It's a go-kart out on US 28!

DreamBean · « **Reply #17 on:** August 10, 2012, 04:00:36 PM »

US 28! Are you talking about the Moonshiners 28?I had to sneak onto 28 a couple of years back. The wife refused to ride on it. So when I caught her napping, I jumped on it. She woke up and I played dumb. We were on our way to the Cherolaha Skyway in the Pinto. I almost got away with it until the lady at the motel told her. I had to pay $75 fer a dang purse to get out of the dog house. She refuse's to go on the Tail of the Dragon with me. I wonder how much that one will cost me.

Grumpy · « **Reply #18 on:** August 10, 2012, 05:30:57 PM »

wondersmelonade
[/size]
[/size]I don't usually go much further than Deal's Gap. I go out on the Hellbender, not US 129, though I sometimes come back that way(through Robinsville). I spend more time on the section between Almond and Franklin. I have no suggestions about appeasing the wife, though. You're on your own there!
[/size]
[/size]Grumpy

Current Classifieds- ALL

Author Topic: Putting Pony wheels on Pinto Pony (Read 4510 times)