Last 12 Shouts:

 

Cookieboystoys

Today at 08:02:02 AM
I know of one person that was able to get 77 material from them. something like this is best to call. could also do a search on google for factory or oem vinyl material reupholster auto. there are other sources and no... materials changed throughout the years
 

RSM

Today at 07:52:15 AM
looks like SMS only goes up to 1975. Would the colors be the same for the later models?
 

Cookieboystoys

May 18, 2012, 09:54:48 PM
winsor351 - google sms auto fabrics - you will have to match your material and have a local reupholster them for you. no place to buy nos/repop covers for pintos

windsor351

May 18, 2012, 08:43:55 PM
I've got a 78 wagon.Anybody know where to get nos/oem seat replacements?

Okiepinto

May 18, 2012, 11:57:00 AM
Racer99; You talkin to me? I read your PM and responded to it. ;D
 

racer99

May 18, 2012, 09:36:38 AM
Brian,have you checked your pm box lately?

Reeves1

May 18, 2012, 04:17:25 AM
Morning Brian !

Okiepinto

May 17, 2012, 11:01:17 PM
Tinson: Guess Fred morgan knew it but I had no clue of how hungry people are for Pinto parts. Running me ragged but it's a good ragged. ;D Holler if I can help with wagon parts
 

Fred Morgan

May 17, 2012, 09:48:25 PM
Keith what freeway are U on now dude you keep me laughing !!
 

Tinson

May 17, 2012, 09:07:23 PM
Hello everyone. How have things been in the pinto world?

Reeves1

May 17, 2012, 08:44:05 PM

Reeves1

May 17, 2012, 07:40:15 AM
Dyno tomorrow !
Time seems to have slowed down for me !

Show 50 latest

Current Classifieds

hood hinges
Date: 04/18/2012 10:26 am
Comments (3)
1972 Ford Pinto Sedan CAR HAS BEEN SOLD!!!!!

Date: 03/19/2012 06:59 am
Comments (0)
1980 mercury bobcat
Date: 04/16/2012 11:06 pm
Comments (0)
Wanted rear wheel well moulding and rear carpet
Date: 04/22/2012 08:42 pm
Comments (0)
Two Pinto Wagons, 1 Cruisin Wagon, 1 Squire, 1 80 Coupe, Misc Parts

Date: 03/28/2012 03:25 pm
Comments (0)
1978 Ford Pinto

Date: 04/23/2012 12:29 am
Comments (1)
1974 Pinto Radiator $50 York, PA

Date: 03/24/2012 10:51 am
Comments (0)
RH turn signal lense
Date: 03/24/2012 01:29 pm
Comments (1)
Aluminum 2.3 flywheel
Date: 05/04/2011 01:23 pm
Comments (0)
NIB Modine Radiator for 74- SOLD, SOLD, SOLD
Date: 04/15/2012 01:47 pm
Comments (0)
1972 Turbo Pinto Lowered price

Date: 02/25/2012 02:57 pm
Comments (3)
RH turn signal lense
Date: 03/24/2012 01:29 pm
Comments (1)
WTB 1974 pinto AC parts and sending unit.
Date: 04/05/2011 11:17 am
Comments (0)
74 to 80 2.3L oil pan and pickup tube
Date: 05/21/2012 10:24 pm
Comments (0)
I need an oil pan for my 75 wagon.
Date: 03/23/2012 09:44 pm
Comments (0)
In need of
Date: 05/22/2011 03:21 pm
Comments (0)

Author Topic: Ford Pinto Pangra Restomod  (Read 4858 times)

0 Members and 1 Guest are viewing this topic.

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Ford Pinto Pangra Restomod
« on: September 26, 2011, 02:26:30 PM »
My New Toy for 2011 - The Pangra
 
built from the mail order kits available in the 70's
 
2.0L Turbo Motor was pulled a few years back for the upgraded V8 in it now
 
I have the 2.0L Turbo Motor and was part of the deal when I purchased it
 
This one shall stay a V8 but that turbo motor may find it's way into my other 73
 
if you want to see more ~> http://www.cookieboystoys.com/friends/pangra.htm
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!



Advertise Here on FordPinto.com

Offline blupinto

  • Pinto Sr. Master
  • ******
  • Posts: 3916
  • FeedBack: +18/-0
  • Gender: Female
  • My Original Blu '72
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #1 on: September 26, 2011, 05:55:26 PM »
Brian, that car is SO SWEET!!! Cookie Monster must be giving you good JuJu in return for good cookies... ::)
One can never have too many Pintos!

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Re: Ford Pinto Pangra Restomod
« Reply #2 on: September 26, 2011, 08:31:36 PM »
Thanks Becky, it's scares Cookie Monster, he won't ride in it...  ::)   ;)
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!


Offline blupinto

  • Pinto Sr. Master
  • ******
  • Posts: 3916
  • FeedBack: +18/-0
  • Gender: Female
  • My Original Blu '72
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #3 on: September 27, 2011, 06:04:37 PM »
WHAT!?! After all those chocolate chip cookies he scarfed down!? I don't believe it! Riding in that Green Bullet would go so nicely with his chocolate-fueled caffeine rush.  :lol:
One can never have too many Pintos!

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Re: Ford Pinto Pangra Restomod
« Reply #4 on: September 27, 2011, 07:11:10 PM »
I think Animal is the muppet for this one, finally get to pull him out of the box...
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!


Offline Pinturbo75

  • Pinto Sr. Member
  • ****
  • Posts: 417
  • FeedBack: +3/-0
  • Gender: Male
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #5 on: September 27, 2011, 10:17:09 PM »
lol,,,, i have that one too!!!!! he hangs out in the music room with the drums in my shop.....
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Re: Ford Pinto Pangra Restomod
« Reply #6 on: September 28, 2011, 07:21:50 AM »
lol,,,, i have that one too!!!!!

Wow! I found him on Ebay a few years ago, been in the box since.
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!


Offline Pinturbo75

  • Pinto Sr. Member
  • ****
  • Posts: 417
  • FeedBack: +3/-0
  • Gender: Male
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #7 on: September 28, 2011, 07:37:35 AM »
i found mine in a car at the junkyard.... you should have seen the look on the guys face when i put him on the counter and said, how much for the doll?????
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Re: Ford Pinto Pangra Restomod
« Reply #8 on: September 28, 2011, 07:57:40 AM »
you should have seen the look on the guys face when i put him on the counter and said, how much for the doll? ??? ?

Haha! I'll bet that was funny  :)
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!


Offline Reeves1

  • Pinto Sr. Member
  • ****
  • Posts: 449
  • FeedBack: +21/-0
  • Gender: Male
  • BAWS302
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #9 on: September 28, 2011, 09:27:20 PM »
Like the headers on that car.
Didn't know Headman made them though ! Look custom made ?

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Re: Ford Pinto Pangra Restomod
« Reply #10 on: September 29, 2011, 07:43:13 AM »
Hey Reeves1, I have seen them before, made to fit with standard motormounts and standard location is my guess. Since this has the motor plate they wern't required but yes, they look awesome.
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!


Offline Pinto5.0

  • PCCA Charter Member
  • Pinto Sr. Member
  • *
  • Posts: 379
  • FeedBack: +2/-1
  • Gender: Male
  • '80 Hatchback & a '73 Sedan
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #11 on: September 29, 2011, 09:56:45 PM »
Like the headers on that car.
Didn't know Headman made them though ! Look custom made ?

There was a set of flat collector headers on Ebay this year but I believe they specified either 351C or 302 Boss so they made several versions. Price was $300 or so if I remember right & they were never used.
I've wanted a V-8 early trunk Pinto since I was 17. At 46 I'm finally going to build a '73 Sedan...... My '80 hatch will become my son's 1st car.

Offline Reeves1

  • Pinto Sr. Member
  • ****
  • Posts: 449
  • FeedBack: +21/-0
  • Gender: Male
  • BAWS302
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #12 on: September 29, 2011, 09:57:45 PM »
I got to look at the original headers that were on the B2 when it was in my car. Beat up bad & the guy wants way too much for them.
Turns out they have a stamp on them: JR Headers.
I Googled lots & have yet to find the company. I would think they kept the "plans" on what they built & could make another set ?
Ever heard of them ?

Last quote I got for new custom made in Alberta Canada was minimum $3800.00.

Offline Reeves1

  • Pinto Sr. Member
  • ****
  • Posts: 449
  • FeedBack: +21/-0
  • Gender: Male
  • BAWS302
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #13 on: September 29, 2011, 09:59:57 PM »

There was a set of flat collector headers on Ebay this year but I believe they specified either 351C or 302 Boss so they made several versions. Price was $300 or so if I remember right & they were never used.

Going to try & find them now..... if you have more info I'd really like to hear from you !

Offline Pinto5.0

  • PCCA Charter Member
  • Pinto Sr. Member
  • *
  • Posts: 379
  • FeedBack: +2/-1
  • Gender: Male
  • '80 Hatchback & a '73 Sedan
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #14 on: September 30, 2011, 07:14:07 PM »
Going to try & find them now..... if you have more info I'd really like to hear from you !

They were listed earlier this year. It's been a good 5 months cause I've been with my current GF 4 months & I saw them before I met her.
I've wanted a V-8 early trunk Pinto since I was 17. At 46 I'm finally going to build a '73 Sedan...... My '80 hatch will become my son's 1st car.

Offline Srt

  • Original Pangra Master Builder
  • PCCA VIP
  • Pinto Master
  • ***
  • Posts: 999
  • FeedBack: +52/-0
  • Gender: Male
  • Pinto Stampede ROCKS
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #15 on: October 01, 2011, 03:22:00 AM »
I got to look at the original headers that were on the B2 when it was in my car. Beat up bad & the guy wants way too much for them.
Turns out they have a stamp on them: JR Headers.
I Googled lots & have yet to find the company. I would think they kept the "plans" on what they built & could make another set ?
Ever heard of them ?

Last quote I got for new custom made in Alberta Canada was minimum $3800.00.

http://www.jegs.com/p/JR-Race-Car/JR-Race-Car-Exhaust-Headers/1528511/10002/-1
 
Don't know how current there listings will be.  I would not be surprised if they stopped making them years ago.
the only substitute for cubic inches is BOOST!!!
Of course money helps too!!!

Offline Reeves1

  • Pinto Sr. Member
  • ****
  • Posts: 449
  • FeedBack: +21/-0
  • Gender: Male
  • BAWS302
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #16 on: October 02, 2011, 01:26:18 PM »
Found some. Says an engine plate is required. No picture of it. Will call them Monday....

http://www.summitracing.com/parts/HED-85602/Application/?prefilter=1

Offline 79prostreet

  • Pinto Member
  • **
  • Posts: 42
  • FeedBack: +0/-0
  • Gender: Male
  • HOW GREAT IS OUR GOD!!!!
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #17 on: October 02, 2011, 03:29:55 PM »
The set of headers from summit is the same set I have for sale, any questions call me 605 335 7993 Bud ( mine are new )
79prostreet

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Re: Ford Pinto Pangra Restomod
« Reply #18 on: October 02, 2011, 04:22:38 PM »
Found some. Says an engine plate is required.

motor plate installed on the Pangra, I sent you pics... didn't I?
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!


Offline Reeves1

  • Pinto Sr. Member
  • ****
  • Posts: 449
  • FeedBack: +21/-0
  • Gender: Male
  • BAWS302
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #19 on: October 02, 2011, 06:14:58 PM »
motor plate installed on the Pangra, I sent you pics... didn't I?

Yup, you sent pictures. Hard to really see what they look like though, with them mounted in the car with the engine.

79 prostreet - we traded PMs before. Never did get pictures. Yours are the 2" meant for Clevor heads (BOSS 302) ? I had thought yours were the smaller ones for a 302w ?
Take pictures of them & with a proper measurement of tube size. Would also need a good picture of the port flange (where it bolts to the head), that shows the shape. I have read your sale ads & no mention of which engine they fit. Nor that a person needs the special engine mounts to use them. (we also talked on the phone)
To be honest, I'd rather deal with a business. Even if it would cost double +. If I bought yours, and they didn't fit......

If I get that style, after a fitting I would get them ceramic coated.

Offline Pinto5.0

  • PCCA Charter Member
  • Pinto Sr. Member
  • *
  • Posts: 379
  • FeedBack: +2/-1
  • Gender: Male
  • '80 Hatchback & a '73 Sedan
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #20 on: October 02, 2011, 09:27:37 PM »
Found some. Says an engine plate is required. No picture of it. Will call them Monday....

http://www.summitracing.com/parts/HED-85602/Application/?prefilter=1

Yep, thats the set I saw on Ebay. I didn't know they still make them but I knew the ad said Boss 302. They used to be called "flat collector headers" in the old days.
I've wanted a V-8 early trunk Pinto since I was 17. At 46 I'm finally going to build a '73 Sedan...... My '80 hatch will become my son's 1st car.

Offline Reeves1

  • Pinto Sr. Member
  • ****
  • Posts: 449
  • FeedBack: +21/-0
  • Gender: Male
  • BAWS302
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #21 on: October 03, 2011, 07:41:25 AM »
It is going to be a busy day, but I'll post an up-date after I call them on the phone.
My 2007 F-350 died at work & I had to trailer it to the local Ford dealer. I have to go in & hand my keys to them & generally hang out being a pest till they find out what is wrong/broke. Drive line still under warranty. But what is wrong/broke may not be.....so I want to keep an eye on them so they do not spend my money ! I may be able to get the part at the junk yard & fix it myself for less.
I strongly dislike new vehicles computers.....

edit:

Got the truck fixed. It was the FICM. No idea what or where it is, but it was stuck open. Warranty covered.

Got home & called the Summit tech support. He said yes, they will work on my car. But they do not stock the headers or motor mounts. They call Headman, order them & when they come in ship to the person. May try & get direct from Headman.....

Offline Reeves1

  • Pinto Sr. Member
  • ****
  • Posts: 449
  • FeedBack: +21/-0
  • Gender: Male
  • BAWS302
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #22 on: October 04, 2011, 12:00:43 PM »
I sent an e-mail to Headman Headers, asking if they are still making them.
Reply:

Quote
Dear Sir...I'm sorry but these hedders have been discontinued.. .Thanx for inquiring!


Cookieboystoys : Really sorry for being sort of off topic in your topic !

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Re: Ford Pinto Pangra Restomod
« Reply #23 on: October 04, 2011, 12:28:14 PM »
Cookieboystoys : Really sorry for being sort of off topic in your topic !

okey dokey  :)
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!


Offline Pintopower

  • PCCA VIP
  • Pinto Sr. Member
  • ***
  • Posts: 611
  • FeedBack: +54/-0
  • Gender: Male
  • Why a Pinto? Because I don't care what you think.
  • View Gallery
    • My Car Pictures
Re: Ford Pinto Pangra Restomod
« Reply #24 on: October 10, 2011, 03:53:01 PM »
So when are you going to drive that out here so it can be reunited with its family? I'll be waiting in Betty:
I have many Pintos, I like them....
#1. 1979 Wagon V6 Restored
#2. 1977 Wagon V6 Restored
#3. 1980 Sedan I4 Original
#4. 1974 Pangra Wagon I4 Turbo
#5. 1980 Wagon I4 Restored
#6. 1976 Bobcat Squire Hatchback (Restoring)
...Like i said, I like them.
...and I have 4 Fiats.

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Re: Ford Pinto Pangra Restomod
« Reply #25 on: October 10, 2011, 06:59:07 PM »
So when are you going to drive that out here...

I would have to take out a loan... at 14mpg... gonna be a big loan  :o
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!


Offline 79prostreet

  • Pinto Member
  • **
  • Posts: 42
  • FeedBack: +0/-0
  • Gender: Male
  • HOW GREAT IS OUR GOD!!!!
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #26 on: October 10, 2011, 07:32:47 PM »
just desire to settle some dust. the headers I have fit a sbf like my post said ( 1 1/8 x 1 3/4 ) ports, not the bigger clevor style heads. I bought them off ebay and had no idea they required a plate for use until this post. If someone feels I'm trying to mislead I am not, was just unaware, sorry for any misleadings. I have changed my headers for sale post to tell of the need for an engine plate.
79prostreet

Offline Norman Bagi

  • Founder PintoStampede.com
  • PCCA Management Board
  • Pinto Sr. Member
  • ******
  • Posts: 747
  • FeedBack: +19/-0
  • Gender: Male
  • "Boss 302 Pinto"
  • View Gallery
    • The Pinto Stampede
Re: Ford Pinto Pangra Restomod
« Reply #27 on: October 10, 2011, 08:17:20 PM »
Brian, When you gonna let me take her for a spin.   :'(

Offline Cookieboystoys

  • PCCA Management Board
  • Pinto Master
  • ******
  • Posts: 1978
  • FeedBack: +42/-0
  • Gender: Male
  • It's All About The Pinto's! Baby!
  • View Gallery
    • Cookieboy's Toys
Re: Ford Pinto Pangra Restomod
« Reply #28 on: October 11, 2011, 06:59:48 AM »
Norm, you have to wait till next year... it's in storage for the long winter  :'(
Visit www.PintoStamp ede.com and Join The 2012 Pinto Stampede!


Offline Pintaro

  • Pinto Full Member
  • ***
  • Posts: 143
  • FeedBack: +0/-0
  • Gender: Male
  • View Gallery
Re: Ford Pinto Pangra Restomod
« Reply #29 on: October 13, 2011, 05:29:13 PM »
Hey Brian, Nice Pangra. I just picked up my 11th pinto today.Already set up with a 302 with the headers still hooked to the mufflers
                                                       Mike


Advertise Here on FordPinto.com
 


Advertise Here on FordPinto.com