Last 12 Shouts:

Ethan Hamilton

October 17, 2014, 01:26:38 PM
WAZZUP PINTO DUDES AND DUDETTES I HAVE JOINED YOUR ORDER ;D

ppiinnttoo

October 15, 2014, 07:21:46 PM
Thanks TIGGER for the info now I no to get 71-78 dash cap for it
 

TIGGER

October 15, 2014, 05:46:07 PM
ESS cars should have the ralley gauges (tach) so it will have the 71-78 dash pad.  You are going to want to purchase a 71-78 cap for your ESS.

ppiinnttoo

October 13, 2014, 09:41:31 PM
Anybody know where to finda79 pinto essdash cap people says a regular one will fit it wont

Reeves1

October 12, 2014, 09:37:53 PM
So, will not fit my 72 ? Or just a little small, but works ?
 

Scott Hamilton

October 12, 2014, 01:14:24 PM
Reeves1- You are correct, replacement windshields have the same part number (same replacement PPG part) for all Pintos, BUT, the 71-72 (and maybe the 73?) have a slightly larger windshield that you can't seem to find anywhere unless you find a NOS item. I found out the hard way when I replaced mine...

Reeves1

October 11, 2014, 10:39:16 AM
Used the search....yup, the same.

Reeves1

October 11, 2014, 09:51:53 AM
71 - 78 windshields the same ?
 

SeanP

October 11, 2014, 08:04:20 AM
I'll be out cruisin today, mostly in Ocean Springs.

Pintocrazed

October 10, 2014, 06:30:55 AM
LOOK AT WHEN YOU CAN TINSON ITS A GREAT CAR
 

Tinson

October 10, 2014, 12:52:20 AM
Well it was probably 100ft or more when I saw it leaving cruise central but it looked good from where I was standing

Pintocrazed

October 09, 2014, 07:37:52 PM
Sorry it was supposed to say trunk

Show 50 latest

Author Topic: Reolacing the door hinge pins  (Read 1429 times)

0 Members and 1 Guest are viewing this topic.

Offline r4pinto

  • Pinto Sr. Master
  • ******
  • Posts: 3308
  • FeedBack: +22/-0
  • Gender: Male
  • All hail Ford Pinto!!!!
Reolacing the door hinge pins
« on: April 04, 2009, 06:38:27 PM »
I know this is going to be of use to anyone on here...

Anyways while some people have posted about needing hinge pins & others have said a GM pin works I have some more information..

This can be found in the HELP! section at auto parts stores & the part number is 38400. You will need two per door and they cost about $6 each.

Just cut out the old pin, knock out the old bushings, lightly knock in the new ones, drive the pin on home & shorten it up. It is a little longer than the original pin, but who cares about that. It is easily cut with a hacksaw, and makes a world of difference with the door.

Hope this helps anyone that needs them.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress


Advertise Here on FordPinto.com

Advertise Here on FordPinto.com
 


Advertise Here on FordPinto.com