PINTO CAR CLUB of AMERICA
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Brando on October 23, 2003, 09:51:08 PM
-
Does any know of a site/know of the spec's for the head torque of a 2300 engine?
-
My CLYMER book say that you need to first tork them (in sequence) to 60ft.-lb. and then go back (in sequence) to 80-90ft.-lb.
Start from the center on one side & go back in forth working your way toward the ends.