Current Classifieds

1976 pinto for sale

Date: 01/12/2017 02:08 pm
Built and Injected early 2000cc Engine

Date: 04/10/2017 07:30 pm
1971 Pinto 5.0L

Date: 12/02/2017 12:23 am
74 Driver side Wagon Fender, 74 driver side Door, Nice Wheels

Date: 09/15/2019 08:30 pm
Need lower control arms for 1973 pinto
Date: 02/27/2017 10:10 pm
1979 Pinto 3-door Runabout *PRICE REDUCED*

Date: 01/21/2023 04:19 pm
74 Pinto Hub Caps & Trim Rings

Date: 02/18/2017 04:47 pm
Pinto Watch

Date: 06/22/2019 07:12 pm
Needed, 2.0 or 2.3 motors
Date: 09/30/2018 07:47 pm
Wanted Pinto Fiberglass Body Parts
Date: 08/16/2018 08:54 am
A.c. alternator hrackets
Date: 09/03/2017 12:11 pm
Wanted Postal Pinto
Date: 09/26/2019 05:31 pm

« previous next »
Pages: [1]   Go Down

Author Topic: write up on adapting 75 turn signal switch to 71 pinto plug  (Read 1241 times)

0 Members and 1 Guest are viewing this topic.

Offline biggrgivens

  • Pinto Member
  • **
  • Posts: 43
  • FeedBack: +2/-0
  • Another Pinto Driver

    • Total Badges: 3
    Badges: (View All)
    Topic Starter Mobile User Windows User
write up on adapting 75 turn signal switch to 71 pinto plug
« on: May 24, 2015, 05:48:09 PM »
I can match up 6 of the wires by color code, but I cant figure out the other 4 wires. Is there a write up for splicing the 71 plug to a 75 turn signal switch and harness. All help appreciated.
Logged

Offline Wittsend

  • Pinto Master
  • *****
  • Posts: 2499
  • FeedBack: +241/-0

    • Total Badges: 8
    Badges: (View All)
    Tenth year Anniversary Mobile User Topic Starter Poll Voter 1000 Posts Linux User Windows User Fifth year Anniversary
Re: write up on adapting 75 turn signal switch to 71 pinto plug
« Reply #1 on: May 24, 2015, 07:34:34 PM »
I swapped out my '73 Pinto column for my '88 Turbo Coupe column. In the process I had to trace down the wires. Here are my notes (use at your own risk) Maybe this will help though I'm not sure if the '71 and '73 used the same color code and if those colors changed after the connector. I did notice that even 15 years later a fair amount of the color code was the same for the '73 and '88 columns. 

Curved connector

Black/pink - I have noted that it is activates the key buzzer, not sure beyond that

Light Green - I have as brakes with a question mark???

Blue - I have as the radio in the accessory position.

Orange/blue - I have as passenger rear

Green/red - I have a drivers rear

White/red - I have as flashers/emergency

Yellow/blue - I have as hot full time for the horn and emergency flashers

Dark Blue - I have as the horn

White/blue - I have as Passenger front

Light Green/white I have as drivers front

Maybe that will help though I'm not sure if the '71 and '73 used the same color code and if those colors changed after the connector.

Rectangular, black connector

Purple/white - Brake warning

Black/green (thick) - Accessory

Red/blue - Start

Red/green - Run

Yellow (thick) 12 volt in

Black - I have "all small lights" but don't recall the meaning





Logged

Offline oldkayaker

  • Pinto Master
  • *****
  • Posts: 758
  • FeedBack: +114/-0
  • Gender: Male

    • Total Badges: 5
    Badges: (View All)
    Topic Starter Signature Windows User Tenth year Anniversary Fifth year Anniversary
Re: write up on adapting 75 turn signal switch to 71 pinto plug
« Reply #2 on: May 25, 2015, 07:24:04 AM »
According to the wiring diagrams I have, the 71 and 75 Pinto turn signal switch wire colors should be near identical, not sure about the plugs.  Both years show a total of 9 wires.  After 40 years, the wire colors tend fade and/or shift color some.
W-LB:  RH dash turn indicator
W-LB:  RH front turn light
LG-W:  LH dash turn indicator
LG-W:  LH front turn light
LG-O:   LH rear turn/stop light, (early 71's used LB-O, this is only difference found between early 71 and late 71 & 75)
O-LB:   RH rear turn/stop light
LG:      brake pedal switch
W-R:   emergency flasher
LB:      turn signal flasher
Logged
Jerry J - Jupiter, Florida
Pages: [1]   Go Up
« previous next »