Author Topic: T-bird TC rear disk brakes (Read 2749 times)

crazyhorse · « **on:** September 15, 2003, 12:15:02 AM »

OK i've had an idea, will the rear disks on an 87-88 T-bird Turbo bolt to a pinto axle?
i understand that i'll need the caliper brackets, E-brake hardware, proportioning valve, master cylinder, ETC.
All I'm sure of is that they share a 4 on 4 1/4" bolt pattern for the lugs. but are the mounting flanges the same (or close enough to make steel adapters)

crazyhorse · « **Reply #1 on:** October 07, 2003, 11:48:35 AM »

Well I'm guessing that they don't work and that it was a stupid question LOL

But seriously i have access to an 88tc rolling(and rolled) chassis complete with the brakes, and wheels
i'd have to buy the whole car just to find out if the rear brakes fit, so if anyone knows PLEASE let me know before they scrap it

SVOwagon · « **Reply #2 on:** October 07, 2003, 06:30:19 PM »

Yes.. they will work. I have not done this myself, but I have see many Pintos that have. If you have heard of Joe Morgan...his pinto was in Hot Rod and he has them on his. Go to www.turboford. org and you can find out more about the swap there.
SVOwagon

crazyhorse · « **Reply #3 on:** October 12, 2003, 06:47:45 PM »

Thanks SVO Wagon

I appreciate the info.

News:

Current Classifieds

Author Topic: T-bird TC rear disk brakes (Read 2749 times)

crazyhorse

T-bird TC rear disk brakes

crazyhorse

Re:PLEASE HELP!! they're going to scrap my donor!!T-bird TC rear disk brakes

SVOwagon

Re:T-bird TC rear disk brakes

crazyhorse

Re:T-bird TC rear disk brakes