42 Guests, 1 User
CanadianBatman
Last 12 Shouts:

Ethan Hamilton

October 17, 2014, 01:26:38 PM
WAZZUP PINTO DUDES AND DUDETTES I HAVE JOINED YOUR ORDER ;D

ppiinnttoo

October 15, 2014, 07:21:46 PM
Thanks TIGGER for the info now I no to get 71-78 dash cap for it
 

TIGGER

October 15, 2014, 05:46:07 PM
ESS cars should have the ralley gauges (tach) so it will have the 71-78 dash pad.  You are going to want to purchase a 71-78 cap for your ESS.

ppiinnttoo

October 13, 2014, 09:41:31 PM
Anybody know where to finda79 pinto essdash cap people says a regular one will fit it wont

Reeves1

October 12, 2014, 09:37:53 PM
So, will not fit my 72 ? Or just a little small, but works ?
 

Scott Hamilton

October 12, 2014, 01:14:24 PM
Reeves1- You are correct, replacement windshields have the same part number (same replacement PPG part) for all Pintos, BUT, the 71-72 (and maybe the 73?) have a slightly larger windshield that you can't seem to find anywhere unless you find a NOS item. I found out the hard way when I replaced mine...

Reeves1

October 11, 2014, 10:39:16 AM
Used the search....yup, the same.

Reeves1

October 11, 2014, 09:51:53 AM
71 - 78 windshields the same ?
 

SeanP

October 11, 2014, 08:04:20 AM
I'll be out cruisin today, mostly in Ocean Springs.

Pintocrazed

October 10, 2014, 06:30:55 AM
LOOK AT WHEN YOU CAN TINSON ITS A GREAT CAR
 

Tinson

October 10, 2014, 12:52:20 AM
Well it was probably 100ft or more when I saw it leaving cruise central but it looked good from where I was standing

Pintocrazed

October 09, 2014, 07:37:52 PM
Sorry it was supposed to say trunk

Show 50 latest

Author Topic: valve cover  (Read 657 times)

0 Members and 1 Guest are viewing this topic.

Offline brians89stang

  • Pinto Member
  • **
  • Posts: 29
  • FeedBack: +0/-0
  • Another Pinto Driver
valve cover
« on: April 21, 2010, 02:36:25 PM »
I bought too 2000 pinto engs & one of them had  aluminum valve cover that says pinto on the front top left side . Anybody know anything about these ?


Advertise Here on FordPinto.com

Offline Reynard

  • Pinto Member
  • **
  • Posts: 16
  • FeedBack: +0/-0
  • Gender: Male
Re: valve cover
« Reply #1 on: April 21, 2010, 04:09:04 PM »
All I know is that I wish it were mine!!
Thanks.

Bill

Offline brians89stang

  • Pinto Member
  • **
  • Posts: 29
  • FeedBack: +0/-0
  • Another Pinto Driver
Re: valve cover
« Reply #2 on: April 21, 2010, 04:52:13 PM »
It is a cool cover , that made my mind up on keeping that eng in it or putting a turbo 2.3 or a V8 . It also had a header , offy 4bl intake & a crain cam

Offline oldkayaker

  • Pinto Sr. Member
  • ****
  • Posts: 566
  • FeedBack: +66/-0
  • Gender: Male
Re: valve cover
« Reply #3 on: April 21, 2010, 08:29:42 PM »
It might be the IECO cover, although the "Pinto" logo was on the right hand top of the cover (as viewed from the driver's seat).  The IECO cover had fins on top and was painted with a black crinkle finish.

SPEARCO also made a cover but it did not have the "Pinto" logo.  It also had a finned top but was not painted.

This is per a couple old catalogs I have.
Jerry J - Jupiter, Florida

Offline brians89stang

  • Pinto Member
  • **
  • Posts: 29
  • FeedBack: +0/-0
  • Another Pinto Driver
Re: valve cover
« Reply #4 on: April 22, 2010, 08:28:40 PM »
From the drivers  seat it is on the right side &  is black crinkle & finned


Advertise Here on FordPinto.com
 


Advertise Here on FordPinto.com