Author Topic: master cylinder (Read 278 times)

mrpinto73 · « **on:** July 11, 2012, 11:25:11 AM »

i put a new cap and gasket on master cylinder still have leak any help

r4pinto · « **Reply #1 on:** July 11, 2012, 02:17:39 PM »

sounds like u need to replace the entire thing if it is stil leaking

pinto21 · « **Reply #2 on:** July 11, 2012, 09:38:10 PM »

You might try 2 gaskets cut out the center just use the thicker flat part of the gasket, makes a tight fit.

Pinto5.0 · « **Reply #3 on:** July 12, 2012, 12:10:14 AM »

That bail wire should take some serious pressure to snap over the cap. If it's not a tight fit try bending it to make it tight.