Author Topic: Dashbord Pad Removal (Read 472 times)

Bart68 · « **on:** July 04, 2012, 02:00:05 AM »

I´m going to give my bobcat´s dashpad a new skin. Now my question. Are there any skrews which fix the Pad or is it just gluefixed?

Thank´s for your help.

TIGGER · « **Reply #1 on:** July 04, 2012, 02:05:29 AM »

Its bolted to the metal hull. There are like 7 or 8 nuts that you have to remove to remove the dashpad

Bart68 · « **Reply #2 on:** July 04, 2012, 03:02:28 AM »

hey Tigger, do i have to Remove any Electric to get this bolts?

Scott Hamilton · « **Reply #3 on:** July 04, 2012, 09:33:24 AM »

Bart,

Here is an excellent video from Brian (Cookieboystoys) for dash cap installation.

Bart68 · « **Reply #4 on:** July 04, 2012, 09:51:33 AM »

Thank's a lot Scott, but i want to remove the complete dashboard, i mean this cap
and the foam. (Sorry perhaps my englisch is not as Good as it has
to be)

Scott Hamilton · « **Reply #5 on:** July 04, 2012, 10:29:31 AM »

Hey Bart,

There are 8-10 Nuts you need to remove from the underside of the dash, they are 10mm nuts. You will need to remove the instrument cluster-(I work on 72-73's so if there are differences, someone correct me.) There are 2 screws in the instrument cluster on the top, remove these and tilt out. I use a long screwdriver to compress each side of the instrument cluster multi connector. Then remove the speedometer cable, squeeze (compress together) while pulling... Later models have a few other small connectors but overall that's it. You then will be able to access all the nuts under the dash. 2 nuts hold the dash speaker mount so remember to put this back in when you put it back together.

Hope this helps.

Bart68 · « **Reply #6 on:** July 05, 2012, 12:00:21 AM »

Thank you Scott, at my next
free time, i will try and report.

chrisf1219

turbopinto72

Scott Hamilton

turbopinto72

cutelitlputtputt

cutelitlputtputt

navy72pinto

blupinto

blupinto

johnbigman2011

cutelitlputtputt

cutelitlputtputt

Current Classifieds- ALL